-40%
CY512 Intelligent Stepper Motor Controller IC - legacy parts - New old stock
CY512 Intelligent Stepper Motor Controller IC - legacy parts - New old stock
CY512 Intelligent Stepper Motor Controller IC - legacy parts - New old stock

CY512 Intelligent Stepper Motor Controller IC - legacy parts - New old stock

$ 110.88

  • Body Material: Plastic
  • Brand: Cybernetic Micro Systems
  • Case/Package: 40-pin DIP
  • Contact Material: Tin plate
  • Country/Region of Manufacture: Malaysia
  • Custom Bundle: No
  • Harmonized code: 8542.31.0000
  • Interface Type: Parallel or Serial
  • Item Height: 0.457 cm (0.180 in)
  • Item Length: 5.283 cm (2.08 in)
  • Item Width: 1.524 cm (0.600 in)
  • MPN: CY512
  • Maximum Clock Frequency: 11 MHz
  • Maximum Input Current: 80 mA
  • Maximum Operating Temperature: 70 °C (158 °F)
  • Maximum Operating Voltage: 5.5 V
  • Minimum Operating Temperature: 0 °C (32 °F)
  • Minimum Operating Voltage: 4.5 V
  • Mounting Style: Through-Hole
  • Number of I/Os: 8
  • Number of Pins: 40
  • Packaging: Foam
  • Type: Embedded Processor

Description

These are new parts, in stock at Cybernetic Micro Systems, for system repairs and for builds of existing designs. Normally ships in tubes of ten chips. Smaller quantities will ship on foam. Discontinued — Repairs and legacy builds only. Not intended for new designs. Not RoHS compliant. Images are representative only and not indicative of actual product marking. Please contact us if you need a higher quantity than shown in this listing. Stock levels vary daily and are not always reflected in this listing. CY512 Overview The CY512 intelligent positioning stepper motor controller is standard 5 volt, 40 pin LSI device configuration to control any four-phase stepper motor controller. The CY512 will interface to any computer using parallel TTL input and provides numerous TTL inputs and outputs for auxiliary control and interfacing. The CY512 allows sequences of hi-level type commands to be stored internally in a program buffer and be executed upon command. The TTL outputs sequence the stepper drive circuits that consist of standard power transistors or transistor arrays. When absolute position commands are executed, the CY512 automatically determines whether it is necessary to move CW or CCW to reach the specified target position. Standard Features ASCII-Decimal or Binary communication Single 5-volt power supply 25 High-level language commands Stored Program capability Half-step/Full-step capability Absolute/Relative Position modes Programmable via ASCII keyboard 8000+ Steps per second (11 MHz Xtal) Programmable Output line Two Interrupt Request outputs More Linear Ramp than CY500 Higher Rate Resolution than CY500 Programmable Delay Software Direction control Hardware/Software Start/Stop 'Abort' capability Automatic Direction determination Ramp-up/Slew/Ramp-down Verify Register/Buffer contents Step Inhibit operation 'Do-while' and 'Wait-until' commands 'Jump to' command Several Sync inputs and outputs 'Slewing' Indication output 'Terminate' Step Line for max acceleration Loop Command with Repetition Count Export: Commodity# 8542.31.0000 License# NLR Control# EAR99